Handlebars

Thomson custom-drawn alloy drop bars are optimized with performance-based bends, paired with tough, durable features. The lineup includes 3 profiles with varying widths, shapes and flares to meet all disciplines of drop bar goodness. Made from 7000 series aluminum, and sharing the carbon drop bar shapes, the alloy drops feature 3 profiles a mid flat, a round profile, and the flared dirt drop. The mid-flat is minimal in design and big on comfort. The flat diameter stays small enough so to not restrict hand movements when riding on the tops. Concave shaping on the bottom side allows housing to be taped and out of the way. The round profile and flare dirt drop share similar top profiles with custom-drawn ergonomic bends.

Chain-rattling pavement is no longer an issue thanks to Bontrager's innovative IsoCore technology in this Pro IsoCore VR-CF road bar. An additive to the carbon layup, IsoCore mutes 20% more vibrations than other carbon bars. Once you experience the comfort and control of IsoCore, you'll never want to ride another bar. - OCLV carbon with IsoCore continuous inner-laminar technology - Replaceable IsoZone EVA pads maintain original grip diameter - Variable Radius Compact Flare (VR-CF) bar shape offers greater comfort in all hand positions - IsoCore technology decreases road vibration by 20% over traditional carbon bars - Includes four replaceable EVA IsoZone pads for tops and drops

- Award-winning Vibrocore foam core provides vibration-damping, proven to reduce arm pump and hand-numbness - 25° aggressively flared, wide drop bar for true off-road performance and comfort - Short 110mm drop and 65mm reach geometry is perfect for aggressive riding in a more upright, balanced stance - 8mm bar clamp extends through the top section, providing enhanced hand support and comfort without multiple wraps of tape to increase diameter - Round profile upper section facilitates a wide range of rider/hand positions and maximizes grip on the bars in rough terrain - Recommended for: ASTM 3, Gravel Features: - Key Technologies: Vibrocore, On-Off Road Geometry - Material: Zirconium Doped 7-Series Alloy - Width, Hood to Hood (c-c): 420 / 440 / 460 / 480 / 500 / 520mm - Width, Barend to Barend (o-o): 562 / 582 / 602 / 622 / 642 / 662mm - Weight (g): 345 / 350 / 355 / 370 / 375 / 380 - Drop/Reach: 110mm / 65mm (all sizes) - Flare: 25° - Ramp: 14°

The Gossamer Compact uses the same evolved shape as our high-end handlebars – shallow 125mm drop, short 80mm reach, optimized for the shape of current shifters. Rider comfort is further enhanced by the flattened top section, giving an easy platform to rest your hands on. The Gossamer Compact uses 6066 aluminum, which is double butted and tapered to put strength where it's needed and trim weight where it's not. Shot peening improves fatigue resistance, and an extra-wide bulge section in the center of the bar leaves ample room for accessories. - Double butted, tapered, and shot-peened AL6066 - 34mm ergo flat top - 110mm-wide round center section makes it easy to mount accessories - Bar width: center/center from the handlebar tails

- D-shaped lightweight optimized 2014 aluminum alloy construction - Provides better "pushing" compliance for a smoother ride quality - Provides better "pulling" stiffness for cornering, sprinting, and climbing efficiency - Drop 125mm - Reach: 72mm - 8 degree flare

- D-shaped composite tubing - 6% lighter than Contact SLR Compact handlebar - 10% more "pushing" compliance compared to Contact SLR Compact handlebar for a smoother ride quality - 30% more "pulling" stiffness compared to Contact SLR Compact handlebar for cornering, sprinting, and climbing efficiency - Drop 125mm - Reach: 72mm

- D-shaped composite construction. - Provides better "pushing" compliance for a smoother ride quality. - Provides better "pulling" stiffness for cornering, sprinting and climbing efficiency. - Drop 125mm. - Reach: 72mm. - Backsweep: 5 degree. - 8 degree flare.

Engineered for endurance riding, the ultra-lightweight Contact SLR D-Fuse handlebar offers compliance and ergonomic fit for the most demanding conditions. FEATURES: - Proprietary D-Fuse shaping on the tops for superior compliance and lightweight. - 8-degree flare in the shallow drops puts the hand and wrist in a comfortable and efficient position. - Compatible with Contact SLR and SL Aero and AeroLight stems for full internal cable routing. - Ergonomically shaped contact points fit the hand and palm from various angles, alleviating fatigue and numbness that can occur over long miles. - Precision composite lay-up for optimal weight and stiffness. - 40% more compliant and 15 grams lighter than the previous Contact SLR D-Fuse handlebar. SPECIFICATIONS: - Weight: 185g (420mm) - Bar Clamp Diameter: 31.8mm - Width: 380/400/420/440mm - Reach: 125mm - Drop: 72mm - Rise: 0° - Backsweep: 0° - Outsweep: 0° - Flare: 8° - Material: Carbon

The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width. - 760mm wide - Wide to start and trimmable by 30mm each side - Made from tough 7050 lightweight aluminum SPECIFICATIONS - Type: Riser - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9

Light weight, comfort, and strength: the new SL-70 Ergo is the ultimate handlebar for long days in the saddle. The SL-70 Ergo combines the flat bar top shape of the beloved Contour SL bar with numerous modern features sought after by riders and pro bike fitters. The SL-70 Ergo sports a 70mm reach and 128mm drop. The short 70mm reach has been a popular choice in recent years, as it allows bike fitters flexibility in achieving a comfortable position without sacrificing steering control. The drop utilizes a variable radius, allowing for multiple hand positions and deeper movement into the drop. As a result, reach to the brake lever is shorter. A 3° backsweep on the flat tops keeps the wrist in a comfortable position, essential for long days on pavement or gravel, while the 10° ramp angle provides a smooth transition to modern shifter hoods. Brake and shifter housing is elegantly hidden along the underside of the bar. - Updated distinctive Zipp cosmetics - Unidirectional carbon built for stiffness, comfort, and light weight - Flattened top shape with 3° backsweep for comfort - Variable radius drop for multiple hand positions and deeper movement into the drop. - Lifetime warranty

Based on his incredibly popular 4-piece handlebar, we worked with WeThePeople pro, Felix Prangenberg, on a 2-piece version to allow him to switch it up from time to time. Using fully heat-treated and multiple-butted Japanese chromoly tubing, the new Pathfinder 2-piece bar feels just like the original 4-piece but with the classic 2-piece look and a lower weight. The Pathfinder 2-piece handlebar features an oval crosstube for improved strength and dent resistance. MATERIAL: - Full liquid post heat-treated 4130 "M2" crmo TUBING: - Multiple butted chromoly RISE: - 9" / 9.6" WIDTH: - 28" BACKSWEEP: - 11.5 degrees UPSWEEP: - 3 degrees SPECIAL FEATURES - "Pre-cut" to 28" - Oval crosstube for dent resistance and strength

A beast like pro rider Dillon Lloyd needed a bar built to withstand the biggest drops and burliest of crashes. The Buck bar is one of the first bars in BMX to utilize the new 25.4mm clamping technology, allowing for a stronger, stiffer bar that a rider like Dillon can have full confidence in, without having to worry about it slipping or breaking when things get rough. WeThePeople used time-tested "M2" heat-treated, 4130-chromoly tubing and Dillon's own geometry to create this ultra-dependable set of bars you can get "Buck" with. - Tubing: 7/8" multiple butted - Easy-cut marks on the end of the bars - Dual radius bends for extra strength - Backsweep: 11-degrees - Upsweep: 1.5-degrees - Weight: 22.2mm bar: 895g (31.5oz/1.97lbs), 25.4mm bar: 925g (32.48oz/2.03lbs)

- Mild flat section is small enough not to restrict hand movements and allows for angle adjustment - 7000 series aluminum construction that exceeds ISO requirements - Shaping on the bottom side of the top section allows for smooth routing options - Width measured center to center. 230g (40cm)

- D-shaped lightweight optimized 2014 aluminum alloy construction - Provides better "pushing" compliance for a smoother ride quality - Provides better "pulling" stiffness for cornering, sprinting, and climbing efficiency - Drop 125mm - Reach: 72mm

The Contact XC 35 handlebar is purpose built for modern XC riding and racing. With a 0 rise keeping weight over the front of the bike on steep climbs, this bar combines a more traditional 9 degree back sweep with a contemporary 760mm width and 35 mm diameter for added control, stiffness and durability. - Lightweight, optimized alloy. - 35mm clamp diameter increases strength and maximizes durability . - 9 degree back sweep with 0 degree rise optimal for modern XC action.

Thomson's Carbon Road Handlebars are as light, stiff and strong as they are beautiful. Thomson crafts them of three types of unidirectional Toray carbon, molding them in one piece and putting a mild wing shape on top for a nice platform and support for your hands. And you get the perfect bend for riding in all hand positions with plenty of clearance for your wrists at any bar angle. Plus, there are provisions on the bottom for the cables so you get a tidy tape job and even more comfort.

Thomson MTB Aluminum Handlebar 800mm 35mm Rise 9degree back 5 degree up 35.0 clamp. - Produced from 7050 alloy then butted and tapered for optimal fatigue life - Produced with an advanced hydraulic forming press to ensure consistent wall thickness and exact tolerances - Bar Clamp Diameter: 35.0mm

Super tough, straight gauge, 100% 4130 chromoly handlebars. The deeply knurled clamping area prevents your bars from slipping, so you can keep shredding! Product Specifications - Material: 4130 Chromoly - Width: 29.5" - Backsweep: 12° - Upsweep: 1° - Weight: 34.4oz

- Handlebar optimized for 19mm diameter bar ends - Exclusively fits smaller grips for optimal ergonomics. - 650mm Bar - Offers ample width for increased bar control. - 6061 Sand Blasted Aluminum - Requires 22.2 Shim Kit (170915-01) - Rise: 20mm - Handlebar Width: 650mm - Stem Clamp Diameter: 31.8mm - Handlebar Material: Aluminum - Handlebar Weight: 260g

Profile's Largo bar uses double-butted 7075 aluminum to make a lightweight handlebar that maximizes stiffness for sprinting and climbing. A wider center clamping area easily accommodates clip-on aerobars and the extended reach means there's no compromise between an aerobar or in-the-drops position. The Largo is also shot peened and anodized for added strength and durability and offers excellent comfort due to its ergonomic bends.

The aero wing section on Profile's full carbon Svet R Carbon Base Bar will slice through the wind quickly and smoothly. It has ergonomically shaped brake extensions for awesome comfort. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Svet puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!

RIP, NO RATTLE. Arm fatigue is real. The solution? More muscle. Or, our new carbon laminate, made to tackle the trail buzz, not transfer it. We re-engineered our bars to improve rider position (adding 5mm rise) and reduce the chatter transferred to the hands and arms. These bars offer the right bit of flex while keeping things stiff, precise, and responsive. Features: - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness Specifications: - Clamp Diameter: 35.0mm - Width: 800mm - Material (HB): Carbon - Rise (HB): 25mm - Type (bar): Riser - Backsweep (degrees): 9 - Upsweep (degree): 5

Designed for gravel racing and fast all-road riding, the Aeroghiaia combines speed, control, and comfort. The speed comes from our aero profile, finally giving you road-bike speed on all possible terrain. Control is enhanced thanks to the flared drops, but the key benefit of the Aeroghiaia is comfort. The aero wing shape provides a large surface for your hands to spread the load, while the multi-angle drops keep the brake hoods vertical (instead of weirdly-angled on regular flares) for comfort. Multi Flare: The Aeroghiaia combines our award-winning Superego grip with a multi-angled flare. The top section of the drop is standard so the hoods are angled as intended, while the lower section has an extreme flare for optimal control. Center Wing: The wing's cross-section is aerodynamic yet comfortable, in particular, when you rest your thumb on top of the bars parallel to your index finger. - Unidirectional carbon—-ultralight layup - Internal cable channels - Stem torque, 4-bolt: 6Nm max. - Stem torque, 2 bolt: 8Nm max. - Shift/brake lever torque: 8Nm max. - Clip-ons: Not compatible (this would require a longer round center section and increase aero drag) - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A

Classic butterfly/trekking/touring handlebars that are perfect for the cyclo-tourist looking to add comfort, efficiency, and stability to their long-distance/multi-day flatbar setups. - Unique bend offers multiple hand positions to help add space, improve comfort, and avoid numbness, strain, pain, and discomfort that can sometimes be associated with riding in the same position for long durations - Highly adjustable with four official hand positions with many more in-between possibilities to help find a position that works for you - Also provides more cockpit space for accessories (bells, computers, mirrors, etc) and handlebar bags - AL-6061 Plain Gauge construction creates a durable and lightweight handlebar that won't break the bank - Grip Area: 148mm - Weight: 500g

Brendan Fairclough's signature handlebar is an homage to the effortless style, grace, and speed exemplified by Brendan's every move. The BF800 Brendog signature handlebar, which has been developed and tested on the World Cup DH circuit for almost three years to perfect the feel he demands for World Cup-caliber speed. Creating the perfect combination of rise, width, bends, sweep, flex, and responsive damping is not an easy task, but DEITY has perfected the ability to deliver the best-feeling handlebars with unparalleled strength time-and-time again. Utilizing Brendan's preferred 8-degree backsweep with our favorite 5-degree upsweep gives this bar a more aggressive positioning to attack the gnarliest DH trails in the world. At an 800mm width and featuring a 30mm rise, our proprietary Gradient Butting Technology coupled with our Mono Heat Treatment Procedure delivers a handlebar that is more than 20% stronger than any other handlebar from our competition at this weight category. We guarantee you will look as good as Brendan riding his signature BF800 Brendog Handlebar while you're pushing your limits to match his speed and style! So get your hands on DEITY's latest and greatest rider collaboration, designed to elevate your ride to podium status! - The Brendan Fairclough Signature Handlebar - Designed for DH / Enduro / All MTN applications - Developed and tested rigorously for nearly 3 years on the World Cup DH circuit - Incredibly detailed two-tone bead blast and polished ano finish - Brendog signature 8-degree bend / backsweep by 5-degree upsweep - 800mm width - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - Mono Heat Treatment Procedure for increased strength - Stiffness for tracking yet compliant for endless chatter and big hits - Wider center bore spacing for unrivaled stability - Designed for maximum ride quality with a 31.8mm bore - Alignment control markers for perfect set up and spacing of your levers - Features measured cut marks and center alignment detail - Black ano finish with color graphics - Covered by our Lifetime Crash Replacement Policy to the original owner - 30mm rise (343 grams)

- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9-degree backsweep and 5-degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength to weight ratio - Base Handlebar uses 6061 aluminum

Chromag has a strong history of manufacturing handlebars. The OSX is one of our best selling products and put us on the map as a bike components company. The OSX has a reputation for its perfect combination of bend and upsweep. This geometry combined with an array of colour choices has made the OSX a popular choice for pretty much any discipline of mountain biking. The OSX 2020 is the next step in our progression. By refining the shape, and utilizing variable butting, high grade alloys and advanced heat treatment techniques, we have increased the fatigue life by over 50%. So much so, that we’ve seen fatigue test results reach over 1 million cycles. Material // Custom drawn 7000 series alloy Width // 800mm (31.5”) Clamp Size // 31.8mm Rise // 25mm (1”) Bend // 8° Upsweep // 5° Weight // 325g

- Wide center profile for on-the-top spinning and a 205mm forward extension with upswept ends for sprints in the city or on the track - Can be used with track grips, bar-end shifters, or brake levers if needed - 1-piece 6061-T6 aluminum construction

On the big days, it's the small comforts that make the ride better, longer. That's why we re-engineered our carbon riser bars to improve feel, flex and rider positioning and reduce trail buzz. These bars are stiff, precise and forgiving. With a re-tuned carbon laminate, your shoulders, arms and hands keep fresh all day. - Available in 760mm carbon with 20mm rise - 35mm clamp - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness SPECIFICATIONS - Type: Riser - Clamp Diameter: 35.0mm - Width: 760mm - Rise: 20mm - Backsweep (degrees): 7

The Rex bars are perfect if you are looking for a big pair of bars, but not enormous. Like all Kink handlebars, the Rex bars use only the best 4130 chromoly steel material and our TruTherm post-weld heat treatment process to ensure maximum strength. The 13-butted tubing design means the bars are thicker in the bends, which adds strength where bars need it most. TECH SPECS - Rise: 9.5-inches - Width: 29.5-inches - Backsweep: 12 Degrees - Upsweep: 1 Degree - Tubing: 13-Butted 4130 Chromoly Steel - Heat Treatment: TruTherm Post-weld Heat Treated - Weight: 29.0oz

The Svet TT was designed for Time Trial and Triathlon usage and features a sleek UCI compliant 3:1 wing. Strategic cable slot positioning enables streamlined internal compatibility for electronic or mechanical shifting cable management while the zero drop and upturn brake extensions provide better positioning for climbing and cornering while in the pursuits. - Weight: 210g (42cm) - Width: 44cm (center to center) - Center Clamp Diameter: 31.8mm - Clamp Width: 140mm - (44mm) - Clip Compatible: Yes - Material: Multi-Direction, Multi-layer Carbon Fiber - Pursuit Reach: 165mm (center to tip) - Pursuit Drop: 0mm - Pursuit OD/ID: 25.4 / 19.5mm - Drop Outsweep: No

The deep aero wing section on Profile's full carbon Prosvet Base Bar will slice through the wind quickly and smoothly. It has ergonomically shaped brake extensions for awesome comfort. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Prosvet puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!

Get back on the road with a replacement handlebar for your cruiser bike. Customize your bike with a new handlebar that fits your own personal style. PRODUCT DETAILS - Traditional 35 degree back sweep handlebar - 6061-T6 polished aluminum with anodize finish - RIDE+ versions have an integrated cable guide inside

The super-aero 3:1 wing section on Profile's full carbon Svet Zero Base Bar will slice through the wind quickly and smoothly. It has ergonomically shaped brake extensions with 0-degrees of drop for awesome comfort. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Svet puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!

- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9 degree backsweep and 5 degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength to weight ratio - Base Handlebar uses 6061 aluminum

On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 Ergo handlebar. The Service Course lineup provides options to match every rider with a high-performance, precise fitting bar. The Service Course 70 Ergo packs a powerful punch of everything you'd want in a bar — a design based on feedback from pro bike fitters and riders, an ergonomic top section, and a price you'll love. - 6061 aluminum for low weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape to better fit the hand - ISO 4210 compliant

It's Stiff, Not A Stiff. It's the little things that matter most. That's why we scrutinized our carbon riser bars, tasking our pros and engineers to make great even better. The result? We added 5mm to the rise of our widest bar; and fine-tuned the carbon laminate. This translates to an improved riding position, more feel and flex, and less arm fatigue making your time on the trail more smiles, less chatter. Features - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness Specifications: - Clamp Diameter: 31.8mm - Width: 760mm - Material (HB): Carbon - Rise (HB): 20mm - Type (bar): Riser - Upsweep (degree): 5

With the Descendant series, TRUVATIV focuses in on the characteristics that matter most to true mountain bikers: durability, specificity, affordability, and style. Guided by input from the best riders, the components in the Descendant line have been designed to work on the most aggressive trails. - Stiff, precise, and super-wide - Carbon fiber perfection

The Grime Bar is Denim Cox’s signature handlebar. This 4 piece bar is constructed from heat-treated multiple butted 4130 chromoly. Heavyweight street aesthetic without being heavy weight.

You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black

- A bar for those with a fear of heights, the #869 has a slightlylower rise than its big brother, the #8069 - 1"(25.4mm) clamp, 10.5" rise, 23.5" wide - Handmade in Maysville, Kentucky