Parts & Accessories

Expand the cooking surface on your EXO OpenRange with this metal side table. PRODUCT DETAILS - 16" x 31" Powder coated steel surface is heat resistant and perfect for stove use - Height adjustable support leg (26-44"), to level out the table - Metal rod folds out to support camp stove propane tanks, or doubles as a towel rack - Included storage bag helps protects the side table for in-vehicle storage PRODUCT SPECS - Weight: 13.50 lbs. - Dimensions: L 31.00 in x W 16.00 in x H 0.50 in - Limited Two Year Warranty

Expand the food prep zone on your EXO OpenRange with this bamboo wood side table and nesting cutting board. PRODUCT DETAILS - 13" x 27" UV protected Bamboo table with a premium finish - Height-adjustable support leg (26-44"), to level out the table - Includes plastic cutting board and collapsible wash basin with drain hose that nests into the table surface cutout - Included storage bag protects the side table when not in use and can be stowed inside OpenRange PRODUCT SPECS - Weight: 5.50 lbs. - Dimensions: L 27.00 in x W 13.00 in x H 0.50 in - Limited Two Year Warranty

From protecting your precious cargo with padding and less sliding around to removing melted snow at the bottom of your box, give your gear some extra love with this custom-molded cargo box floor liner for your SkyBox NX 18 - Molded Liner fits snugly in SkyBox 18 NX - Added protection for ski edges and other cargo - Easy removal for simple clean up

Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 33" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed - Weight: 1.35 lbs - Dimensions: L 5.50 in x W 1.50 in x H 2.75 in

Custom Landing Pads to install directly to the factory fixed mounting points of the 2005+ Toyota Tacoma. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

Landing Pad designed to fit a variety of BMW vehicles with fixed 7mm threaded mounting points. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2020+ Toyota Highlander. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 30 7/8" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed Product Specs: - Weight: 1.38 lbs.

Attaches SkyLine Towers or Control Towers to many popular factory luggage rack tracks. PRODUCT DETAILS - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal “C” anchor plates 1-3/16” x 13/16” (Contact Yakima Customer Service for additional size anchor plates) PRODUCT SPECS - Weight: 0.60 lbs.

Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2021+ Nissan Rogue. Combine with SkyLine Towers and StreamLine crossbars for a full featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required. - Snap on covers to keep the elements out while the rack is removed

From protecting your precious cargo with padding and less sliding around to removing melted snow at the bottom of your box, give your gear some extra love with this custom-molded cargo box floor liner for your SkyBox NX 16 - Molded Liner fits snugly in SkyBox 16 NX - Added protection for ski edges and other cargo - Easy removal for simple clean up

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings. Fit cars - BMW X3 5-dr SUV with Flush Rails 2011 – 2017 - BMW 3-Series 5-dr Wagon with Flush Rails 2013 – 2019 - BMW X5 5-dr SUV with Flush Rails 2014 – 2018 - BMW X4 5-dr SUV with Flush Rails 2015 – 2018 - BMW X6 5-dr SUV with Flush Rails 2015 – 2020 - BMW X1 5-dr SUV with Flush Rails 2016 – 2020 - BMW X3 5-dr SUV with Flush Rails 2018 – 2020 - BMW X2 5-dr SUV with Flush Rails 2018 – 2020 - BMW X4 5-dr SUV with Flush Rails 2019 – 2020 - BMW X5 5-dr SUV with Flush Rails 2019 – 2020

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings. Fit cars - Audi A4 Avant 5-dr Wagon with Flush Rails 2009 – 2012 - Audi Q5 5-dr SUV with Flush Rails 2009 – 2017

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings. Fits cars - Lexus NX 300h 5-dr SUV with Flush Rails 2015 – 2020 - Lexus NX 200t 5-dr SUV with Flush Rails 2015 – 2020 - Lexus LX 570 5-dr SUV with Flush Rails 2016 – 2020 - Lexus RX 5-dr SUV with Flush Rails 2016 – 2020 - Lexus RX L 5-dr SUV with Flush Rails 2018 – 2020 - Lexus UX-Series 5-dr SUV with Flush Rails 2019 – 2020

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

Custom-fit kit for mounting a Thule roof rack system to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks - Comes as a package of four and helps attach a complete roof rack system to your specific car - Compatible with Thule Evo Clamp and Thule Edge Clamp footpacks

The Swagman Horizontal RV Bike Bag - Large is new and improved with larger volume to allow for wider handle bars and a greater variety of hitch-mounted tray-style racks including our Escapee. Constructed of super-tough, water-resistant 420 D Nylon. Covers up to 2 bikes on any RV hitch-mounted rack. Not for use on regular vehicles, only RV, 5th Wheels & Travel Trailers. - Constructed of super tough, water-resistant 420 D Nylon - Covers up to 2 bikes - Not to be used on the back of a vehicle. The main issue is wind, putting the RV bag on the back of a regular vehicle (non-RV) subjects it to an excessive force from the wind, which will likely tear/shred the bag, but also puts an undue load on the bike rack and the bikes which can lead to the rack failing or damage to the bikes. - Ensure that bike and covers are clear of exhaust pipes and that the cover can't get caught in any moving parts on the vehicle.

These 12' locking multi-purpose cargo straps are a must-have accessory for anyone with a rack. Lock anything from surfboards and boats to bikes and motorcycles. Even strap and lockdown ladders and other gear. You'll wonder how you ever lived without them.

Swagman's RV Horizontal Bike Bag quickly and easily covers up to 2 bikes on a hitch-mounted rack. It's made of water-resistant polyurethane-coated nylon, and it has cinch straps and a large zip opening for a streamlined fit.

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system

Compatible with all Yakima Crossbars and Platforms, TrackTower is a robust and simple solution for direct-to-track applications that is loaded with heavy-duty features and a robust off-road weight rating

The Hi-Lo Pro takes our Hi-Lo to the next level. We have added our proprietary Flat-lock hitch cam that ensures a zero-wobble user experience. We have also included our fully redesigned hitch lock. - Hi-Lo Pro is a 2” hitch extension (works with 2” hitch receivers) with a 250 lb. weight limit - Provides 2" of drop or 2" of rise to the vehicle receiver - Provides 10” of Hitch Extension - Matte Black with black water transfer logos - Patent Pending - No Worries Warranty - Approved for use with the NV 2.0 (including NV 2.0 Add-On), Base 2.0 (including NV Base 2.0 Add-on) Sherpa 2.0, Transfer family, and the original NV 2” 2-bike only

Form fitting saddles hug and grip the surface for maximum stability and protection. - Multiple pivot points conform to different hull shapes - Soft form-fitting design increases stability by providing a strong hold to the hull. - Needs two packs or combination of packs to carry one kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Includes 1 load strap with padded buckle and 1 ratcheting bow/stern rope - Primary watercraft: Kayak

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 8 SKS Cores and matching keys - 2 keys included plus a control key

A permanently mounted bracket that allows 1A Raingutter Towers or Q Towers to be used in some situations where no raingutters exist. Installed with carriage bolts, washers, and lock nuts. - Stainless steel hardware included - If you are attempting to use QTowers and our bolt top loader for your vehicle you will need a pair of Q41 clips, sold separately. - Sold as pairs Product Specs: - Weight: 1.00 lbs. - Dimensions: L 7.10 in x W 2.50 in x H 0.75 in - Limited Lifetime Warranty

Load up and secure bulky gear with this set of heavy-duty adjustable brackets for the LockNLoad platform rack. Designed to hold just about any hard-shelled container-including coolers, storage bins, or even a toolbox—these brackets provide peace of mind for carrying gear on any rugged adventure. The drop-in style T-slot eyebolts make them easy to install and adjust, and they pair well with Yakima Heavy-Duty Straps or other tie downs (sold separately). Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Secures hard-shelled containers up to 3' tall and 110 lbs./50 kg. - Heavy-duty stamped-steel construction, with a durable black-zinc coating. - Easily installs in minutes on the LockNLoad platform rack and most other T-slot equipped platforms. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Packaged as a set of 4 brackets, easily pairs with our Heavy-Duty Tie Down Straps (sold separately). Product Specs: - Weight: 5.00 lbs - Dimensions: L 4.50in x W 4.00in x H 3.75in - Some assembly required, 15 minute install

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge, and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 38-inch - Fits Thule AeroBlade - Fits Thule SquareBar