Tools/Maintenance

Squorx nipple drivers for wheelbuilding and servicing DT wheels with Squorx nipples (Spline One).

Zyklop ratchet has 72 fine-pitched teeth to ensure a low return angle of only 5 degrees. The ratchet head pivots freely and can be locked into any position by using the slide switch. With enhanced hand clearance, it works conveniently even in confined and difficult-to-access areas. The predefined locking positions at 0, 15 und 90 degrees, both to the right and left, ensure safe working without any slipping of the ratchet head. The ratchet can be used as a conventional screwdriver in the 0 position by attaching an adaptor and a bit. The flywheel design ensures rapid screwdriving, and the rotation-symmetric construction of the Kraftform handle and the free-turning sleeve support rapid twisting. The outstanding design of the Kraftform handle fits perfectly into the hand, preventing blisters and calluses. The softer anti-slip zones enable the low-loss transfer of high torque. - Combines 5 different types of ratchet into one tool - Flywheel design and easy-to-grip free-turning sleeve for high working speeds - Freely pivoting ratchet head, push-button release and left/right switchover - Fine-tooth design allows a small return angle of 5 degrees

- Anodized aluminum construction. Includes mounting hardware - Measures the diameter of loose ball bearings - Measures the inner and outer diameter of cartridge bearings - Metric and Standard measurements

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

200 Hour/1 Year Service Kit (Includes Dust Seals, Foam Rings, O-Ring Seals, Damper Sealhead, Air Spring Sealhead) - Boxxer RC C1 (2019)

200 Hour/1 Year Service Kit (Includes Dust Seals, Foam Rings, O-Ring Seals, Damper Sealhead, Air Spring Sealhead) - Boxxer RC2 C1 (2019)

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals, Charger 2 sealhead, Dual Position seals) - Lyrik B1/Pike 29+ (2018+)

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals, Charger 2 sealhead, Dual Position seals) - Pike B1 (2018+)

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.

Wera torque indicator with fixed torque for hexagon sockets. The slip clutch guarantees a clearly audible and tactile trigger signal when the set torque value is reached, and is then impossible to apply any further torque. The loosening torque is significantly higher than the set tightening torque, so no additional tools are needed for loosening screw connections. The shape of the handle fills the whole hand well and the fingers lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transmission. - T-handle is ideal for transferring controlled tightening torque and high loosening torque - Error-free screwdriving due to non-slip friction clutch and exact torque transmission - Tamper-proof against accidental changing of set torque value - Corrosion-resistant blade

Internal components for servicing the Reverb and Reverb Stealth mechanism.

SRAM's Disc Brake Bleed Kit has everything you need to ensure your brakes are dialed. The kit is compatible with SRAM X0, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following: • 2 syringes/fittings • bleed blocks • Torx tool • Crow's foot • Bleeding Edge Fitting • DOT 5.1 hydraulic fluid

The Muc-Off 8 in 1 Bicycle Cleaning Kit is perfect for any lover of bikes. Complete with Muc-Off's Nano Tech Bike Cleaner, Expanding Microcell Sponge, Soft Washing Brush, Detailing Brush, Claw Brush, Two Prong Brush, Bike Spray and Storage Tub this kit has pretty much everything you need to keep your bike looking nice and tidy. It makes a great Christmas or birthday gift for your bicycle-obsessed friends and family. This kit isn't style-specific either. No matter if you're into Road, MTB, Cyclocross or just getting from A to B, this 8-in-1 kit solves even the most annoying bike cleaning problems!

- Installs press-fit BB30/86/90

For extra protection of your favorite tools, Topeak's PrepStation Case Cover is made of 1000-denier nylon and EPE foam and slides perfectly over the PrepStation (sold separately). Even with it on, you can still unlock and extend the handle to move the case around quickly and easily.

For anyone who doesn’t want to be confined to parking lots or trailheads — adventurers, racers, and garage mechanics — Küat designed the Tri-Doc for you. Tri-Doc offers an affordable way to turn your NV 2.0 into a travel stand. Reliable tri-leg design creates a stable platform for needed tune-ups or repairs. Aluminum construction finished with polished anodizing pairs perfectly with your NV 2.0. - Portable telescoping design - Quick setup - Pairs with your NV 2.0 Trail Doc - Anodized finish reflects NV 2.0 - Rubber feet offer additional stability and protection

- UPDATED for 2021 - Ergonomic design provides efficiency, comfort, and safety. - Updated bridge geometry fits modern chains including SRAM 12 Speed Road. Visit pedros.com/chainfit for compatibility info. - Patented Retracting Pin Guide (RPG) provides superior functionality and reliability. - Includes peening bit and backer for Campagnolo chain installation.

The QTH-1 is an ergonomic T-handled bit driver equipped with eight common bits to fit a wide variety of fasteners and fittings found on bicycles. The magnetic "quick-change" handle allows for one-handed operation and makes changing bits quick and easy. The bit holder can be magnetically attached to any magnetic surface such as a repair stand or tool box, or can be permanently mounted to any wall or tool board. The QTH-1 is a professional-grade tool built to withstand the rigors of daily shop use and is fully rebuildable. Includes the following magnetic 1/4" bits: - 2mm, 2.5mm, 3mm, 4mm, 5mm & 6mm hex - T25 Torx-compatible - #2 Philips cross tip - Bit holder includes empty spaces for 2 extra bits

Securely holds any of Park's TS-2, TS-2.2, and TS-2.2P Professional Wheel Truing Stands and tilts 20 degrees from front to back for comfortable wheel work and sight lines at any bench height. Features a wide, sturdy base, small parts compartments, spoke wrench holders, and is constructed of a durable composite material.

The DC-2 is a vernier caliper for accurately measuring seat posts, head tubes, bearings, spoke diameters, and other components, featuring a large LCD screen for accuracy and ease of use. The tool’s ability to measure in metric and inches in external, internal, depth, and stepped dimensions make it an indispensable shop tool. - Range: 150 mm | 6" - Resolution: 0.01 mm | 0.0005" - Accuracy: +/- 0.02 mm | 0.001" - Repeatability: +/- 0.01 mm | 0.0005" - Measures external, internal, depth, and stepped dimensions - Uses LR44 batteries

Frame and Fork Taps will become a lifesaver at some time for virtually every mechanic. These taps are made of high-carbon steel and are precision ground. Park Tool Frame and Fork Taps cut easily and fit conventional tap handles.

- Similar to its big brother but at a fraction of the size. The new and more efficient Adjustable Press Stop Mini will make life easier for mechanics as it allows for quick and accurate positioning in places where space is tight at the press of a button. - Adjustable Press Stop slides along 3/8" ACME threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings. - Compatible with new and existing Wheels MFG press kits which utilize a 3/8" ACME threaded rod - Compatible kits include: Press-4, ST0006, Press-1 - Machined aluminum body - Anodized in Wheels MFG red. - Durable steel button - For use with 3/8" ACME threaded press rod (Sold Separately)

- Essential mechanic tools to properly service and maintain all RockShox products - Clamps the shock body for easy maintenance

Ceramic WET is Finish Line’s most advanced and most effective racing lubricant. This wet-style full synthetic lubricant is enhanced with a nano-sized platelets of boron nitride and micron particles of fluoropolymer that build a ceramic coating on the frictional surfaces of parts. Ceramic WET’s extreme durability, amazing smoothness and ultimate quietness ensures maximum drivetrain efficiency. Ceramic WET can be used in all disciplines: Mountain bike, cyclo-cross, road and track racing.

The Dual Insert Kit is the ultimate stealth-mounted mountain bike tool set which features a pair of our innovative tools that discretely and securely hide in the ends of a handlebar: the Tubeless Insert Kit and the Tool Insert Kit. The Tubeless Insert Kit is constructed from lightweight, durable machined aluminum and features a hardened stainless-steel reamer. The kit is easily accessible for quick tire repairs and comes with five high-quality tubeless plugs that can also be stored inside its body. The Tool Insert Kit is constructed from lightweight, durable machined aluminum and features hardened steel tool bits. The kit is easily accessible for quick repairs and comes with 11 different tool bits ideal for today’s modern bikes. The Kits also doubles as bar-end plugs and come with three differently sized O-ring fasteners to ensure a secure fit inside most handlebar openings. Tool Insert - Machined Aluminum Bar plug tool kit - Hex bits: 2,3,4,5,6,8, 10mm - Phillips bit - T10,T25,T30 - Fits all standard MTB handlebars Tubeless insert - Machined aluminum bar plug tubeless repair kit - 5 tire plugs - Combined reamer and insertion tool - Fits all standard MTB handlebars

Securely holds the TS-4 Professional Wheel Truing Stand and tilts 20 degrees from front to back for comfortable wheel work and sight lines at any bench height. Features a wide, sturdy base, small parts compartments, spoke wrench holders, and is constructed of a durable composite material.