Write a Review

Protect both your bikes and your pick-up on your next adventure with heavy-duty, adjustable, padded protection. Features - Flexible padding adjusts across a wide range of tailgates and large handle opening provides backup camera visibility - Bikes remain securely in place with integrated bike separation and multiple-position strap anchors - Bikes and pick-up trucks are protected during transport with heavy-duty vinyl, adjustable padding - Gear can be stored securely, even while driving, due to the inside-facing mesh pockets Technical specifications - Dimensions: 59 x 16 x 2.75 inch - Weight: 6.5-pound

This simple kit easily adapts our OverHaul HD™ and OutPost HD™ truck rack systems to work seamlessly with Yakima HD Tracks—without sacrificing the rack’s 500-lb. on-road carry capacity or its exclusive new 300-lb. Yakima Off-Road Rating (Weight ratings will vary based on application). - Complete kit that works on Yakima HD Track - Designed specifically for OverHaul HD and OutPost HD truck rack systems - Build to last, with aluminum and corrosion-resistant hardware - Maintains both OverHaul HD and OutPost HD 500-lb. on-road and 300-lb. off-road ratings (weight ratings will vary based on application)

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system

Kuat's NV 2.0 Base is loaded with features that make it one of the most equipped platform racks on the planet. This darkened brute features Kuat's foot lever pivot release, adjustable cradles for increased bike fit, integrated cable locks, a hand-tight cam system, and a ballistic black powder coat that will stand up to years of abuse. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks and hitch lock included - Front tire ratchet with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium matte powder coat - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV Add-On 2.0 Base

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

- Holds and covers up to 6 bikes to protect them as well as the tailgate from scratches and damages during bike transport - Padding is cut-resistant, water resistant and UV-stable - Non-slip protection (padded) - Quick-access tailgate release - Soft lining on the truck side of the pad, won't damage paint - Size: full-size truck (XL) or mid-size truck (ML) - Specifically designed for pickup trucks with curved tailgates - ML, Fits tailgates 130cm/50'' wide - XL, Fits tailgates 160cm/60'' wide

Build-out your vehicle to be a true adventure rig-whether to get to the local trailhead or miles from civilization. Designed and thoroughly tested in the rugged Australian Outback, the LockNLoad roof rack platform is a blank slate, ready for you to customize to your needs. Integrated T-slots throughout allow quick and easy attachment of our new LockNLoad accessories. Horizontal slats are designed to attach bike, kayak, surf, ski mounts, or even one of our SkyRise rooftop tents. The LockNLoad easily attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately) or directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapter sold separately) to eliminate the need for crossbars on your vehicle. Available in 6 sizes, there's a platform sized for your vehicle that's Off-Road Rated and ready to explore. Product Details: - Attaches to your vehicle in one of two ways. Directly to an existing roof racks crossbars using LockNLoad Crossbar Clamps (sold separately), or directly to a TimberLine or SkyLine roof rack towers with the LockNLoad SL Adapter (sold separately). - Designed and thoroughly tested in the rugged Australian Outback. - Yakima Off-Road Rated to 165–330 lbs. (depending on vehicle fit and roof type). - Side-to-side slats act like crossbars for easily mounting most bike, kayak, ski mounts and more. - Integrated T-slots in every slat and outer frame, for simple and secure attachment of T-slot and LockNLoad accessories. - Engineered aluminum construction features a textured black powder-coat finish for durability and style. - Six platform sizes ensure a perfect fit on your vehicle for a customized look. - Attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately). - This size platform requires 2 sets of LockNLoad Crossbar Clamps. - Mounts directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapters sold separately). - This size requires 2 sets of LockNLoad SL Adapter and 4 towers. - Full collection of new LockNLoad accessories available to complement any adventure. Product Specs: - Weight: 71.81 lbs - Dimensions: L 84.00in x W 49.00in x H 4.00in - Some assembly required, 60 minute install

Kuat's Beta is a lean, mean rack that carries two bikes (up to 80 lbs. total capacity) and weighs in at just under 14 lbs. - Carries 2 bikes (up to 40 lbs. each) - Total carrying capacity of up to 80 lbs. - Folds up quickly for storage - Tilts down for easy vehicle access - Enhance the Beta with hitch lock system (sold separately) - Hand-tight cam system - no need for additional tools! - Anti-sway carriages for a smooth ride - Aluminum construction is lightweight and extremely durable - Gun Metal Gray powder coat finish - 2-inch weighs only 12 lbs. (lightest weight on the market) - 1.25-inch weighs only 14 lbs. (additional 2lbs due to steel lower end) - Available for 2-inch OR 1.25-inch receivers. The 1.25-inch Beta can fit either hitch size with the 1.25-inch to 2-inch adapter.

The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck's tailgate while the soft felt backing protects your truck's paint. Integrated SitTight bike cradles and G-hook buckles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - G-Hook tension lock system is easy on carbon bike frames and painted surfaces - Medium: Transports up to 5 bikes; Large: Transports up to 6 bikes - Rugged, vinyl coated nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your trucks paint job - Add your own bike lock to the built-in cable lock loop to secure GateKeeper and your bikes to your truck - Reinforced webbing ends for easy installation under the tailgate - Integrated strap management system keeps the pad tight and secure on the way to the trailhead - HindSight tuck-away cover opens up the view for your back-up camera - Medium: Fits mid-size and some older full-size trucks with tailgates from 53-61" wide; Large: Fits modern, full-size trucks with tailgates 62" or wider - Printed graphics and silver reflective Yakima logo PRODUCT SPECS - Size Medium: Weight: 6.43 lbs; Dimensions: L 53.00 in x W 5.00 in x H 17.00 in - Size Large: Weight: 8.15 lbs; Dimensions: L 62.00 in x W 7.00 in x H 20.00 in

Form, meet function. A carrying option worthy of your vehicle’s roof, the CBX combines rugged, trail-ready, aesthetics and an all-new textured surface to raise the cargo box game. The details make the design, with an integrated, easy-grab lid handle that locks gear inside, a removable torque tool that stows away to deliver all available space for your gear, and premium black chrome badging that stands out from the crowd. Product Details - Rugged angular finish and stealth-like texture stands out from the crowd - Intuitive and easy-to-grab lid handle locks gear inside the box and the box to the vehicle - Removable torque-limiting knob ensures a safe and secure installation - Market-leading internal usable space with an unobstructed flattened floor provides more space for your gear - Optimized hatch clearance for better vehicle fit - Internal lid stiffeners for durability and easy open and close - Dual-sided opening for easy access on either side of your vehicle - Hauls gear for up to 5 campers; fits snowboards and skis up to 215cm - Integrated interior tie-down points - SKS Locks included for added security - Black chrome badging - 18 cubic feet of cargo space - Made in the USA Product Specs - Weight: 65.00 lbs. - Dimensions: L 91.00 in x W 38.00 in x H 16.00 in - Minimum Crossbar Spread 24.00in - Maximum Crossbar Spread 40.00in - Limited Lifetime Warranty

Our CrossBar pads combine security and protection with a soft foam core and an anti-slip surface that holds onto your gear. Sectioned hook-and-loop closures are designed to secure around roof rack attachment points and accessories to get a more customized fit for your vehicle. - Foam padding protects boards and boats from damage - Anti-slip material helps keep your gear in place - Sectioned hook-and-loop attachments fit easily around roof rack towers and accessories - Fits most SUPs and fishing kayaks - Fits our CoreBar and JetStream crossbars, factory crossbars, and most other aerodynamic crossbars

Two plus two equals more: More bikes, more adventure, and more fun. Adding on the StageTwo +2 lets you double your capacity to four bikes, each carried securely and in style. The stadium seating architecture increases ground clearance on rutted trails or steep driveways and its offset tray design further minimizes bike to bike interference and maximizes functionality. The forward-facing remote tilt lever means fast access to the trunk area and integrated locking cables combine with your own lock to provide serious security. - Attaches to the 2” StageTwo to carry two additional bikes?Tiered and adjustable bike trays minimize bike to bike interference and maximize ground clearance - StrongArm™ hook secures bike at wheels, protecting painted surfaces and carbon frames - Convenient remote tilt lever for easy rear of car access - Offset Trays for extra bike to bike clearance - Fits most bikes, including fat-tire, mountain, road, hybrid, women’s specific, BMX, kids’ bikes, & E-bikes up to 60 lbs. each - Fits 16” to 29” wheel sizes and tires up to 3.25” wide and up to 5" wide with the StageTwo Fat Bike Kit (Sold Separately) - Accommodates bike wheelbases up to 52” - Integrated SKS (Same Key System) locks included for added bike security - Add your own bike lock to the integrated lock loop for greater bike security - Compatible only with 2" version of StageTwo - Available in two colorways, Anthracite and Vapor

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 6 SKS Cores and matching keys - 2 keys included plus a control key

Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to add Thule square crossbars. The feet mount without tools, are vinyl-coated to protect your vehicle, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how much gear you carry, and most are sealed from the elements to protect the internal mechanism.

LightenUp your path-and easily secure your light bar or a pair of spotlights on your LockNLoad platform rack and Yakima T-slot crossbars. Configurable in 16 different orientations, this bracket provides peace of mind when you head out on nighttime adventures. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Configurable in 16 different arm-mounting orientations. - Supports up to an 18-lb. light bar or a pair of 9-lb. spotlights. - Max light bar length 52" long, max light bar depth 5.25" (including heat sink). - Heavy-duty steel construction, with a durable black-zinc coating. - Fits LockNLoad platform rack and perimeter rails, Yakima JetStream, FlushBar, RailBar, HD Bar T-slots, and most other T-slot equipped platforms and crossbars. - Also accommodates light bars that don't secure from the ends. - Holds lights with 6/8/10 mm hardware, using included torx head hardware for enhanced security. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Specs: - Weight: 1.00 lbs - Dimensions: L 7.25in x W 2.00in x H 2.00in - Some assembly required, 30 minute install

Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 108cm / 43 in

The flexible design fits more bikes than any other hitch rack in its price range. - Fits nearly all bike styles including 16-29" wheels, up to 5" wide tires, and wheelbases up to 52" right out of the box - Adjusting, installing and removing requires minimal effort, as it is one of the lightest platform hitch racks on the market at only 37.5 lbs - The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use - Lock the bikes to the rack and the rack to the receiver keeping everything safe during transport or when parked - Easily transfers between 1.25" and 2" hitch receivers

Fitting kit required for perfect fit of the roof rack to a specific car.

Fully adjustable, upright bike carrier designed for the inside of the truck bed. Features - Quickly secure the bike without frame contact using the ratcheting arm - Ideal for carbon frames, mountain, downhill, ebikes and fat bikes - Accomodates wheel sizes from 20 - 29" and up to 5" tire - Lock bike to rack using Thule's One-Key system (lock included) - Holds 1 bike up to 50lbs - Fits all pickup tailgates - No bolting or drilling required Technical specifications - Max number of bikes: 1 - Dimensions: 40.6 x 18 x 6.7 in - Weight: 11 lb - One Key System compatible

The EVOC TAILGATE PAD is our pickup pad for safe bike transport on your pickup-truck for up to 6 bikes. It combines secure bike fixation and tailboard damage protection in one piece. Made from durable 600 weight Denier, we added a polyurethane coating to make it resistant for the weather that you'll inevitably encounter while you're out shredding. The updated Tailgate pad is equipped with molded foam separations blocks and straps to keep your toys from touching. We recommend vinyl wrapping the tailgate to prevent rub marks from dirt and grit trapped between the tailgate and the tailgate pad. It is also recommended to apply protective tape on the bike's downtime where it makes contact with the tailgate pad to prevent scratching on the frame. Features - Padded pickup tailgate protection - Ideal for shuttling bikes - particularly MTBs - Quick access to tailgate release handle - Fold-Away flap for rear camera (Olive/Black and Black/Olive only) Specifications - Weight: 1850 g (Size M/L), 2300 g (Size XL) - Material: P 600/D PU coated, Tarpaulin - Black/Olive & Olive/Black Sizes: M/L- 136 x 85 x 2 cm , XL 160 x 100 x 2 cm - Colors: Black/White, Black/Olive, Olive/Black Sizes Two sizes are available (M/L & L/XL). Use the M/L for trucks like the Toyota Tacoma, Nissan Frontier, Chevrolet Canyon, Ford Ranger and other compact trucks. Use the L/XL for full-size trucks like the Toyota Tundra, Nissan Titan, Chevrolet Silverado, Ford-F150, Dodge Ram, etc.

Now you can get out there even farther, by carrying extra fuel and water on the LockNLoad platform rack. The low-profile cage height makes it easy to load the can onto your platform, while heavy-duty ratchet straps keep it secure and rattle-free. Accepts 10L or 20L plastic or metal cans. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Holds 1 full 10L or 20L jerry water/fuel can made of metal or plastic, up to 45 lbs./25 kg. - Includes heavy-duty hook straps with steel ratchets, cast-steel eyelets, and a durable black-zinc coating. - Easily installs in minutes anywhere on the LockNLoad platform rack and most other T-slot equipped platforms, with an included 5 mm wrench. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Specs: - Weight: 8.00 lbs - Dimensions: L 14.00in x W 7.50in x H 4.25in - Some assembly required, 15 minute install

Protect your rides

Add the SmarT-Slot Kit 5 to the TopWater box for an even sleeker profile on T-Slot Crossbars. This easy hardware kit replaces the standard mounting hardware, and directly attaches into a T-slot channel on your crossbars. It works with all Yakima T-slot crossbars as well as most other T-slot crossbars. Product Details: - T-slot hardware kit for the TopWater rooftop fishing rod box. - Includes T-slot hardware, covers, and an install tool. - Compatible with all Yakima T-slot crossbars and most other T-slot crossbars. Product Specs: - Weight: 0.12 lbs - Dimensions: L 0.75in x W 0.75in x H 1.60in

Don't let the sleek lines fool you. SkyLine FX is a cutting-edge roof rack with integrated crossbars and towers that has no bar overhang and is designed to support whatever you're carrying. It gives your vehicle a clean, modern aesthetic with a seamless attachment to all of our vehicle-specific Landing Pads. PRODUCT DETAILS - Integrated tower and crossbars, for a clean visual connection to the vehicle, with no crossbar overhang - Secure, easy-to-use tower specifically designed for Vehicles with Fixed Points or Tracks - Includes aerodynamic, T-slot JetStream Black crossbars - SmartFill push-down infill for easy t-slot mount attachment - Sleek tower cover styling with matte finish, tone-on-tone black logo - Easily locks to you vehicle with our SKS system (sold separately) - Multiple bar lengths available for precision sizing on various vehicle roof widths - Uses Yakima's proven Landing Pads for attachment to vehicles with fixed points or tracks - BarBed has 12° of pitch adjustment to optimize tower position and level bars PRODUCT SPECS - Weight: 5.00 lbs. - Dimensions: L 33.50 in x W 5.00 in x H 3.50 in

This exciting addition to our SkyRise Family is your hub for the ultimate mobile base camp in any season. The SkyRise HD tent body is ruggedly constructed with 600D Ripstop polyester fabric and a 3000mm waterproof PU coating. Paired with the weather-shedding waterproof rainfly, you’re set for complete protection against the elements. The extra-large windows and doors provide grand views and great ventilation while the thick wall-to-wall foam sleeping pad provides cushy, all-night comfort. Product Details: - Two size options provide room for two or three campers (small and medium) - Frame geometry offers more usable space - Large doors, windows and skylights open up the vistas - 4-season weather protection: 600D Ripstop Polyester fabric with a 3000mm waterproof PU coating - Rainfly with 210D Ripstop Polyester, 3000mm PU waterproof coating - Guy lines and D-rings on the tent floor to hang gear or tie down the tent in windy conditions - Abrasion-resistant tent floor with textured finish for added durability - Ladder has mid-height adjustment points for easy set-up - Ladder auto-close function that makes it a snap to close up - Tool-free and lockable vehicle mounts easy to put on, quick to take off - Easy-to-deploy design means less work and more play great when it’s dark or raining - 2.5" thick foam mattress - Foam sleeping pad includes a removable cover for easy cleaning - Mesh panel improves ventilation and lets you view the starry skies - Aluminum tent frame is light, strong and pre-set to make pitching a breeze Product Specs: - Weight: 114.64 lbs - Dimensions: L 58.00in x W 48.00in x H 17.00in - Roof rack system required - 15 Minute Install - Tool-free install

Premium hanging hitch bike rack providing superior bike protection and multiple size options to fit the needs of two people or an entire family. Features - Superior bike stability and fit with integrated anti-sway that prevents bike-to-bike contact and "disappears" when not needed - Bikes are safe and secure during transport thanks to 7" of spacing between each bike - Quickly attach bikes and easily secure them to the rack using the ratcheting cradle strap - Compact cradle design accommodates wide variety of bike sizes/frame styles - Lock bikes to the rack using the integrated cable lock (lock included) - Easily fold down bike arms when rack is not in use - Convenient access to the rear of the vehicle using the HitchSwitch lever to tilt the rack down - Easy to carry and handle, thanks to integrated grab handle - Quick to install and easy to lock the rack to the vehicle due to the tool-free, SnugTite stinger (lock included) - Easily transfers between 1.25" and 2" hitch receivers Technical specifications - Max number of bikes: 4 - Load capacity: 150 lb - Max bike weight: 37.5 lb - Dimensions: 42.1 x 11 x 37 in - Folded dimensions: 15.4 x 11 x 37 in - Weight: 35 lb - Distance between bikes: 7 in - Carbon frame compatible - Fits 1.25" receivers - Fits 2" receivers - One Key System compatible - Bike lock included - Receiver lock included

- SnugTite Stinger positions the rack securely into the hitch receiver - The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use - Ratcheting arm and wheel tray secure bikes quickly without frame contact - Easily adjustable trays move side to side to create generous spacing between the bikes - Tool-free AutoAttach system makes it easy to install and remove the bike rack - Fits carbon frames, mountain bike, downhill bikes, 20—29" wheels, and up to 3" tires without adapters. Fat bike adapter kit sold seperately - Includes the Thule One Key System to lock the rack to the vehicle - Maximum bike weight is 50 lbs / 23kg per bike

Designed to help you easily get any type of kayak up on your roof, the HandRoll’s rubber rollers provide load assist with grip, stability, and protection. The bases pivot to automatically fit the shape of your boat, then lock tight to cradle it while traveling. The universal mount fits most roof racks–no tools needed, and heavy-duty straps and tie-downs are included to keep things secure. - Sold in pairs–combine with HandRoll or an additional DeckHand to complete the set - Large rubber rollers provide a built-in load assist to help guide your boat into place - Durable rubber pivoting rollers adjust to boat shape for secure loading - Roller pivot design automatically adjusts to boat’s shape for a secure hold - Universal mounting hardware fits most roof racks - Easy tool-free installation lets you quickly mount, load and go - Locks to roof rack with SKS Lock Cores (sold separately) - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs

Build-out your vehicle to be a true adventure rig-whether to get to the local trailhead or miles from civilization. Designed and thoroughly tested in the rugged Australian Outback, the LockNLoad roof rack platform is a blank slate, ready for you to customize to your needs. Integrated T-slots throughout allow quick and easy attachment of our new LockNLoad accessories. Horizontal slats are designed to attach bike, kayak, surf, ski mounts, or even one of our SkyRise rooftop tents. The LockNLoad easily attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately) or directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapter sold separately) to eliminate the need for crossbars on your vehicle. Available in 6 sizes, there's a platform sized for your vehicle that's Off-Road Rated and ready to explore. Product Details: - Attaches to your vehicle in one of two ways. Directly to an existing roof racks crossbars using LockNLoad Crossbar Clamps (sold separately), or directly to a TimberLine or SkyLine roof rack towers with the LockNLoad SL Adapter (sold separately. - Designed and thoroughly tested in the rugged Australian Outback. - Yakima Off-Road Rated to 165–330 lbs. (depending on vehicle fit and roof type). - Side-to-side slats act like crossbars for easily mounting most bike, kayak, ski mounts and more. - Integrated T-slots in every slat and outer frame, for simple and secure attachment of T-slot and LockNLoad accessories. - Engineered aluminum construction features a textured black powder-coat finish for durability and style. - Six platform sizes ensure a perfect fit on your vehicle for a customized look. - Attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately). This size platform requires 2 sets of LockNLoad Crossbar Clamps. - Mounts directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapters sold separately). - This size requires 2 sets of LockNLoad SL Adapter and 4 towers. - Full collection of new LockNLoad accessories available to complement any adventure. Product Specs: - Weight: 84.57 lbs - Dimensions: L 84.00in x W 62.00in x H 4.00in - Some assembly required, 60 minute install

Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.