Car Racks

Give your truck bed a permanent bike-mounting solution with this fork-style mount. In fact, this mount, with single-sided adjustment skewer for easy loading, can be installed anywhere you can put a couple bolts. Go ahead, get creative. - A "bolt anywhere" fork-style bike mount - Fits bikes with 9mm x 100mm front hubs - Corrosion-resistant anodized aluminum construction Product Specs: - Weight: 0.50 lbs. - Dimensions: L 4.00 in x W 1.50 in x H 1.87 in - Limited Lifetime Warranty

This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any 9mm fork-style bike mount. - 15mm x 110mm - Axle is not included. Works with your bike's thru-axle - Built in safety tabs - Durable black powder-coat finish - All Yakima thru-axle Fork Adapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.40 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty

Premium aerodynamic load bar for an exceptionally quiet ride and easy installation of accessories. 1-pack. - Aerodynamic and quiet - Sliding functionality for easy loading - Easy to install and use Features: - Load bar for Thule Edge roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - Designed and developed for swift click-in assembly with Thule Edge load carrier feet, providing an integrated, low-profile roof rack and a custom look - Smooth installation and removal of accessories thanks to upper T-track with QuickAccess interface - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length Specifications: - Loading width: 36-40 in - Length (in): 41 - Maximum load: lb/75 kg. Please also check the maximum roof load capacity of your vehicle. - Equipped with T-track

Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.

Take your bikes wherever you roam with Hollywood's Express 3! This trunk rack carries three bikes and fits almost any vehicle, including sedans, mini-vans and SUVs. Six straps solidly attach the Express to the rear of the vehicle, and Hollywood's fast and simple hub adjustment system offers easy installation while allowing this rack to fold flat for easy storage. Plus, Hollywood's separators make bike mounting easy and secure and are made of rubber to protect your two-wheeler's paint job. - Spacing between bike cradles: 6-inches - Distance between bike support arms: 15-inches - Weight: 11 lbs - Weight Capacity: 120 lbs

Built with the strength to keep heavy loads in place, our steel, t-slot Load Stops integrate with our new truck collection HD Bars, and most T-slot crossbars. The Load Stop, t-slot quickly installs and adjusts with the turn of a knob and includes integrated tie-down points to makes it easy to secure lumber, ladders, canoes and more. - Made from solid steel for many years of use - T-slot design for easy attachment and removal on our HD Bar, JetStream, and other standard t-slot crossbars - Simple, tool free adjustment is done with the turn of a knob - Built in tie-down points make it easy to secure gear - Handles up to 250 lbs. on our HD Bars, and up to 165 lbs. on Yakima JetStream, FlushBar and RailBar crossbars - Set of four - Weight: 4.00 lbs - Dimensions: L 4.50in x W 1.50in x H 6.50in - Some assembly required, 5 minute install

Compatible with all Yakima Crossbars and Platforms, TrackTower is a robust and simple solution for direct-to-track applications that is loaded with heavy-duty features and a robust off-road weight rating

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 150cm / 60 in

Trail Doc accessory kit for the NV Base 2.0 rack from Kuat Racks.

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings. Fits cars - Lexus NX 300h 5-dr SUV with Flush Rails 2015 – 2020 - Lexus NX 200t 5-dr SUV with Flush Rails 2015 – 2020 - Lexus LX 570 5-dr SUV with Flush Rails 2016 – 2020 - Lexus RX 5-dr SUV with Flush Rails 2016 – 2020 - Lexus RX L 5-dr SUV with Flush Rails 2018 – 2020 - Lexus UX-Series 5-dr SUV with Flush Rails 2019 – 2020

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

Fitting Kits are designed to work with the FlushBar system to provide an integrated, custom installation for each vehicle. - Includes all hardware, base pads, and tool for installation - Complete set of 4 base feet for FlushBar

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 8 SKS Cores and matching keys - 2 keys included plus a control key

The LongArm Height Extension takes your LongArm truck bed extender to the next level. It securely attaches to the LongArm when it's in the vertical position and easily adjusts to match the height of your cab's roof rack. The 165-pound capacity allows for a couple of kayaks or ladders to go up high on your truck, leaving room in your truck bed for other gear, and the included anchor strap tie-downs ensure the load is secure. - Extends your LongArm truck bed extender up to cab height to carry longer loads up to 165 lb - Fully adjustable in height to match your cab's roof rack perfectly - Maintains truck bed space for other gear while still enabling longer loads to be carried such as a fishing kayak, canoe, ladders, lumber and more - Aluminum construction engineered for strength - Durable black powder-coat finish - Included anchor straps secure the LongArm, preventing side to side movement Product Specs: - Weight: 3.00 lbs. - Dimensions: L 2.50 in x W 2.00 in x H 28.25 in - Limited Lifetime Warranty

Load up and secure bulky gear with this set of heavy-duty adjustable brackets for the LockNLoad platform rack. Designed to hold just about any hard-shelled container-including coolers, storage bins, or even a toolbox—these brackets provide peace of mind for carrying gear on any rugged adventure. The drop-in style T-slot eyebolts make them easy to install and adjust, and they pair well with Yakima Heavy-Duty Straps or other tie downs (sold separately). Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Secures hard-shelled containers up to 3' tall and 110 lbs./50 kg. - Heavy-duty stamped-steel construction, with a durable black-zinc coating. - Easily installs in minutes on the LockNLoad platform rack and most other T-slot equipped platforms. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Packaged as a set of 4 brackets, easily pairs with our Heavy-Duty Tie Down Straps (sold separately). Product Specs: - Weight: 5.00 lbs - Dimensions: L 4.50in x W 4.00in x H 3.75in - Some assembly required, 15 minute install

SkyRise Rainfly

Now racking up ladders, lumber and other lengthy gear supplies is a lot easier. Yakima’s new Ladder Roller attaches to our Truck Collection HD Bars and most any T-slot crossbar. - Steel brackets with durable black powder-coat finish for many years of use - Wide 24" (615mm) roller footprint for easy loading of a wide range of gear and equipment - Includes hardware for both our HD Bar and most T-slot crossbars - 75-lb. load capacity - Weight: 2.50 lbs - Dimensions: L 25.75in x W 4.75in x H 2.00in - Some assembly required, 5 minute install

Attaches SkyLine Towers or Control Towers to many popular factory luggage rack tracks. PRODUCT DETAILS - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal “C” anchor plates 1-3/16” x 13/16” (Contact Yakima Customer Service for additional size anchor plates) PRODUCT SPECS - Weight: 0.60 lbs.

Be prepared with this heavy-duty bracket that keeps a high-lift jack accessible, and which conveniently mounts near the LockNLoad platform's perimeter. Easily installs in minutes and suitable for all common jacks. Add your own padlock to the integrated lock loop for greater security. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details - Securely carries 1 high-lift jack with a 50 mm steel standard bar up to 35 lbs. - Heavy-duty stamped steel construction, with a durable black-zinc coating. - Fits the LockNLoad platform rack and most other brands of T-slot equipped platforms. - Installs in minutes with an included 5 mm wrench. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Add your own padlock to the integrated lock loop for greater security. - Limited Lifetime Warranty. Product Specs - Weight: 6.50 lbs - Dimensions: L 7.00in x W 3.00in x H 8.00in

From protecting your precious cargo with padding and less sliding around to removing melted snow at the bottom of your box, give your gear some extra love with this custom-molded cargo box floor liner for your SkyBox NX 18 - Molded Liner fits snugly in SkyBox 18 NX - Added protection for ski edges and other cargo - Easy removal for simple clean up

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 6 SKS Cores and matching keys - 2 keys included plus a control key

Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2020+ Toyota Highlander. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 30 7/8" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed Product Specs: - Weight: 1.38 lbs.

The Hi-Lo Pro takes our Hi-Lo to the next level. We have added our proprietary Flat-lock hitch cam that ensures a zero-wobble user experience. We have also included our fully redesigned hitch lock. - Hi-Lo Pro is a 2” hitch extension (works with 2” hitch receivers) with a 250 lb. weight limit - Provides 2" of drop or 2" of rise to the vehicle receiver - Provides 10” of Hitch Extension - Matte Black with black water transfer logos - Patent Pending - No Worries Warranty - Approved for use with the NV 2.0 (including NV 2.0 Add-On), Base 2.0 (including NV Base 2.0 Add-on) Sherpa 2.0, Transfer family, and the original NV 2” 2-bike only

Thule's Load Bars are a rock solid rack solution that come in 4 different widths to fit a huge range of vehicles.

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge, and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 38-inch - Fits Thule AeroBlade - Fits Thule SquareBar

The Swagman Horizontal RV Bike Bag - Large is new and improved with larger volume to allow for wider handle bars and a greater variety of hitch-mounted tray-style racks including our Escapee. Constructed of super-tough, water-resistant 420 D Nylon. Covers up to 2 bikes on any RV hitch-mounted rack. Not for use on regular vehicles, only RV, 5th Wheels & Travel Trailers. - Constructed of super tough, water-resistant 420 D Nylon - Covers up to 2 bikes - Not to be used on the back of a vehicle. The main issue is wind, putting the RV bag on the back of a regular vehicle (non-RV) subjects it to an excessive force from the wind, which will likely tear/shred the bag, but also puts an undue load on the bike rack and the bikes which can lead to the rack failing or damage to the bikes. - Ensure that bike and covers are clear of exhaust pipes and that the cover can't get caught in any moving parts on the vehicle.