Car Racks

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings. Fit cars - BMW X3 5-dr SUV with Flush Rails 2011 – 2017 - BMW 3-Series 5-dr Wagon with Flush Rails 2013 – 2019 - BMW X5 5-dr SUV with Flush Rails 2014 – 2018 - BMW X4 5-dr SUV with Flush Rails 2015 – 2018 - BMW X6 5-dr SUV with Flush Rails 2015 – 2020 - BMW X1 5-dr SUV with Flush Rails 2016 – 2020 - BMW X3 5-dr SUV with Flush Rails 2018 – 2020 - BMW X2 5-dr SUV with Flush Rails 2018 – 2020 - BMW X4 5-dr SUV with Flush Rails 2019 – 2020 - BMW X5 5-dr SUV with Flush Rails 2019 – 2020

Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 108cm / 43 in

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Custom-fit kit for mounting a Thule roof rack system to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks - Comes as a package of four and helps attach a complete roof rack system to your specific car - Compatible with Thule Evo Clamp and Thule Edge Clamp footpacks

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system

Take your bikes wherever you roam with Hollywood's Express 2! This trunk rack carries two bikes and fits almost any vehicle, including sedans, mini-vans and SUVs. Four straps solidly attach the Express to the rear of the vehicle, and Hollywood's fast and simple hub adjustment system offers easy installation while allowing this rack to fold flat for easy storage, too. Plus, Hollywood's separators make bike mounting easy and secure and are made of rubber to protect your two-wheeler's paint job. - Spacing between bike cradles: 7-inches - Distance between bike support arms: 15-inches - Four attachment straps - Weight: 10 lbs - Weight Capacity: 90 lbs

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

The EVOC TAILGATE PAD is our pickup pad for safe bike transport on your pickup-truck for up to 6 bikes. It combines secure bike fixation and tailboard damage protection in one piece. Made from durable 600 weight Denier, we added a polyurethane coating to make it resistant for the weather that you'll inevitably encounter while you're out shredding. The updated Tailgate pad is equipped with molded foam separations blocks and straps to keep your toys from touching. We recommend vinyl wrapping the tailgate to prevent rub marks from dirt and grit trapped between the tailgate and the tailgate pad. It is also recommended to apply protective tape on the bike's downtime where it makes contact with the tailgate pad to prevent scratching on the frame. Features - Padded pickup tailgate protection - Ideal for shuttling bikes - particularly MTBs - Quick access to tailgate release handle - Fold-Away flap for rear camera (Olive/Black and Black/Olive only) Specifications - Weight: 1850 g (Size M/L), 2300 g (Size XL) - Material: P 600/D PU coated, Tarpaulin - Black/Olive & Olive/Black Sizes: M/L- 136 x 85 x 2 cm , XL 160 x 100 x 2 cm - Colors: Black/White, Black/Olive, Olive/Black Sizes Two sizes are available (M/L & L/XL). Use the M/L for trucks like the Toyota Tacoma, Nissan Frontier, Chevrolet Canyon, Ford Ranger and other compact trucks. Use the L/XL for full-size trucks like the Toyota Tundra, Nissan Titan, Chevrolet Silverado, Ford-F150, Dodge Ram, etc.

From protecting your precious cargo with padding and less sliding around to removing melted snow at the bottom of your box, give your gear some extra love with this custom-molded cargo box floor liner for your SkyBox NX 16 - Molded Liner fits snugly in SkyBox 16 NX - Added protection for ski edges and other cargo - Easy removal for simple clean up

Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2021+ Nissan Rogue. Combine with SkyLine Towers and StreamLine crossbars for a full featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required. - Snap on covers to keep the elements out while the rack is removed

These 12' locking multi-purpose cargo straps are a must-have accessory for anyone with a rack. Lock anything from surfboards and boats to bikes and motorcycles. Even strap and lockdown ladders and other gear. You'll wonder how you ever lived without them.

A premium, universal wheel fork for the new bike axle standards. The universal SpinVice clamp works on most crossbar shapes and is compatible with an SKS lock. - Folds down when not in use - Universal bar attachment with SpinVice clamps - Double wheel retention with axle and ZipStrips - Lockable to crossbars (accepts one SKS lock) - Works with all new wheel and axle sizes TECHNICAL SPECS - Weight: 2.30 lbs - Dimensions: L 19.00” x W 5.00” x H 9.00”

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Swagman's RV Horizontal Bike Bag quickly and easily covers up to 2 bikes on a hitch-mounted rack. It's made of water-resistant polyurethane-coated nylon, and it has cinch straps and a large zip opening for a streamlined fit.

Protect your rides

Landing Pad designed to fit a variety of BMW vehicles with fixed 7mm threaded mounting points. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

Getting a flat's no problem when you secure a spare tire to the LockNLoad platform rack with this heavy-duty retention kit. The T-slot, drop-in style eyebolt hardware allows quick adjustment and removal. Sturdy stainless-steel ratchet straps take up the slack to hold most common size off-road tires in place for any adventure. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Holds 1 wheel with tire, up to 100 lbs. - Holds max tire size of 42 x 17R - Easily installs in minutes anywhere on your LockNLoad platform rack. - Includes heavy-duty hook straps with steel ratchets, cast-steel eyelets, and a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Specs: - Weight: 3.20 lbs - Dimensions: L 7.00in x W 5.00in x H 2.00in

Fitting Kits are designed to work with the FlushBar system to provide an integrated, custom installation for each vehicle. - Includes all hardware, base pads, and tool for installation - Complete set of 4 base feet for FlushBar

No awkward loading here. Loading heavy bikes on the StageTwo family of racks is no problem with the RampUp, just lock the ramp in place and roll your bike up onto the tray. - Ramp interlocks to the end of the StageTwo family trays - Provides Loading assistance for heavy bikes - Durable Aluminum construction - Please remove during transportation PRODUCT SPECS - Weight: 3.92 lbs.

A permanently mounted bracket that allows 1A Raingutter Towers or Q Towers to be used in some situations where no raingutters exist. Installed with carriage bolts, washers, and lock nuts. - Stainless steel hardware included - If you are attempting to use QTowers and our bolt top loader for your vehicle you will need a pair of Q41 clips, sold separately. - Sold as pairs Product Specs: - Weight: 1.00 lbs. - Dimensions: L 7.10 in x W 2.50 in x H 0.75 in - Limited Lifetime Warranty

Form fitting saddles hug and grip the surface for maximum stability and protection. - Multiple pivot points conform to different hull shapes - Soft form-fitting design increases stability by providing a strong hold to the hull. - Needs two packs or combination of packs to carry one kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Includes 1 load strap with padded buckle and 1 ratcheting bow/stern rope - Primary watercraft: Kayak

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 118cm / 47 in

Yakima's Spare Tire Carrier lets you conveniently store your vehicle's spare tire inside your Yakima LoadWarrior or MegaWarrior cargo basket (each sold separately). It holds up to a 35-inch tire, locks with a padlock (sold separately) and leaves plenty of room in the basket for additional gear storage.

Fitting kit required for perfect fit of the roof rack to a specific car.

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings. Fit cars - Audi A4 Avant 5-dr Wagon with Flush Rails 2009 – 2012 - Audi Q5 5-dr SUV with Flush Rails 2009 – 2017

A smart fairing that easily attaches to any Yakima bar—and just about anyone else’s—to quiet wind noise and reduce drag. - Moves airflow up and over the rack to reduce drag and quiet wind noise - Band-style attachment quickly and easily attaches to any crossbar - Secures with easy-to-reach adjustments and included tool

Take your bikes wherever you roam with Hollywood's Express 3! This trunk rack carries three bikes and fits almost any vehicle, including sedans, mini-vans and SUVs. Six straps solidly attach the Express to the rear of the vehicle, and Hollywood's fast and simple hub adjustment system offers easy installation while allowing this rack to fold flat for easy storage. Plus, Hollywood's separators make bike mounting easy and secure and are made of rubber to protect your two-wheeler's paint job. - Spacing between bike cradles: 6-inches - Distance between bike support arms: 15-inches - Weight: 11 lbs - Weight Capacity: 120 lbs

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any 9mm fork-style bike mount. - 15mm x 110mm - Axle is not included. Works with your bike's thru-axle - Built in safety tabs - Durable black powder-coat finish - All Yakima thru-axle Fork Adapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.40 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty

Give your truck bed a permanent bike-mounting solution with this fork-style mount. In fact, this mount, with single-sided adjustment skewer for easy loading, can be installed anywhere you can put a couple bolts. Go ahead, get creative. - A "bolt anywhere" fork-style bike mount - Fits bikes with 9mm x 100mm front hubs - Corrosion-resistant anodized aluminum construction Product Specs: - Weight: 0.50 lbs. - Dimensions: L 4.00 in x W 1.50 in x H 1.87 in - Limited Lifetime Warranty

Custom Landing Pads to install directly to the factory fixed mounting points of the 2005+ Toyota Tacoma. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 150cm / 60 in

Premium aerodynamic load bar for an exceptionally quiet ride and easy installation of accessories. 1-pack. - Aerodynamic and quiet - Sliding functionality for easy loading - Easy to install and use Features: - Load bar for Thule Edge roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - Designed and developed for swift click-in assembly with Thule Edge load carrier feet, providing an integrated, low-profile roof rack and a custom look - Smooth installation and removal of accessories thanks to upper T-track with QuickAccess interface - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length Specifications: - Loading width: 36-40 in - Length (in): 41 - Maximum load: lb/75 kg. Please also check the maximum roof load capacity of your vehicle. - Equipped with T-track

Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.

Compatible with all Yakima Crossbars and Platforms, TrackTower is a robust and simple solution for direct-to-track applications that is loaded with heavy-duty features and a robust off-road weight rating

Trail Doc accessory kit for the NV Base 2.0 rack from Kuat Racks.

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings. Fits cars - Lexus NX 300h 5-dr SUV with Flush Rails 2015 – 2020 - Lexus NX 200t 5-dr SUV with Flush Rails 2015 – 2020 - Lexus LX 570 5-dr SUV with Flush Rails 2016 – 2020 - Lexus RX 5-dr SUV with Flush Rails 2016 – 2020 - Lexus RX L 5-dr SUV with Flush Rails 2018 – 2020 - Lexus UX-Series 5-dr SUV with Flush Rails 2019 – 2020

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

Fitting Kits are designed to work with the FlushBar system to provide an integrated, custom installation for each vehicle. - Includes all hardware, base pads, and tool for installation - Complete set of 4 base feet for FlushBar

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 8 SKS Cores and matching keys - 2 keys included plus a control key

The LongArm Height Extension takes your LongArm truck bed extender to the next level. It securely attaches to the LongArm when it's in the vertical position and easily adjusts to match the height of your cab's roof rack. The 165-pound capacity allows for a couple of kayaks or ladders to go up high on your truck, leaving room in your truck bed for other gear, and the included anchor strap tie-downs ensure the load is secure. - Extends your LongArm truck bed extender up to cab height to carry longer loads up to 165 lb - Fully adjustable in height to match your cab's roof rack perfectly - Maintains truck bed space for other gear while still enabling longer loads to be carried such as a fishing kayak, canoe, ladders, lumber and more - Aluminum construction engineered for strength - Durable black powder-coat finish - Included anchor straps secure the LongArm, preventing side to side movement Product Specs: - Weight: 3.00 lbs. - Dimensions: L 2.50 in x W 2.00 in x H 28.25 in - Limited Lifetime Warranty

Load up and secure bulky gear with this set of heavy-duty adjustable brackets for the LockNLoad platform rack. Designed to hold just about any hard-shelled container-including coolers, storage bins, or even a toolbox—these brackets provide peace of mind for carrying gear on any rugged adventure. The drop-in style T-slot eyebolts make them easy to install and adjust, and they pair well with Yakima Heavy-Duty Straps or other tie downs (sold separately). Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Secures hard-shelled containers up to 3' tall and 110 lbs./50 kg. - Heavy-duty stamped-steel construction, with a durable black-zinc coating. - Easily installs in minutes on the LockNLoad platform rack and most other T-slot equipped platforms. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Packaged as a set of 4 brackets, easily pairs with our Heavy-Duty Tie Down Straps (sold separately). Product Specs: - Weight: 5.00 lbs - Dimensions: L 4.50in x W 4.00in x H 3.75in - Some assembly required, 15 minute install

Now racking up ladders, lumber and other lengthy gear supplies is a lot easier. Yakima’s new Ladder Roller attaches to our Truck Collection HD Bars and most any T-slot crossbar. - Steel brackets with durable black powder-coat finish for many years of use - Wide 24" (615mm) roller footprint for easy loading of a wide range of gear and equipment - Includes hardware for both our HD Bar and most T-slot crossbars - 75-lb. load capacity - Weight: 2.50 lbs - Dimensions: L 25.75in x W 4.75in x H 2.00in - Some assembly required, 5 minute install

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge, and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 38-inch - Fits Thule AeroBlade - Fits Thule SquareBar

The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.

Attaches SkyLine Towers or Control Towers to many popular factory luggage rack tracks. PRODUCT DETAILS - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal “C” anchor plates 1-3/16” x 13/16” (Contact Yakima Customer Service for additional size anchor plates) PRODUCT SPECS - Weight: 0.60 lbs.

Be prepared with this heavy-duty bracket that keeps a high-lift jack accessible, and which conveniently mounts near the LockNLoad platform's perimeter. Easily installs in minutes and suitable for all common jacks. Add your own padlock to the integrated lock loop for greater security. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details - Securely carries 1 high-lift jack with a 50 mm steel standard bar up to 35 lbs. - Heavy-duty stamped steel construction, with a durable black-zinc coating. - Fits the LockNLoad platform rack and most other brands of T-slot equipped platforms. - Installs in minutes with an included 5 mm wrench. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Add your own padlock to the integrated lock loop for greater security. - Limited Lifetime Warranty. Product Specs - Weight: 6.50 lbs - Dimensions: L 7.00in x W 3.00in x H 8.00in

From protecting your precious cargo with padding and less sliding around to removing melted snow at the bottom of your box, give your gear some extra love with this custom-molded cargo box floor liner for your SkyBox NX 18 - Molded Liner fits snugly in SkyBox 18 NX - Added protection for ski edges and other cargo - Easy removal for simple clean up

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 6 SKS Cores and matching keys - 2 keys included plus a control key

Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2020+ Toyota Highlander. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 30 7/8" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed Product Specs: - Weight: 1.38 lbs.

The Hi-Lo Pro takes our Hi-Lo to the next level. We have added our proprietary Flat-lock hitch cam that ensures a zero-wobble user experience. We have also included our fully redesigned hitch lock. - Hi-Lo Pro is a 2” hitch extension (works with 2” hitch receivers) with a 250 lb. weight limit - Provides 2" of drop or 2" of rise to the vehicle receiver - Provides 10” of Hitch Extension - Matte Black with black water transfer logos - Patent Pending - No Worries Warranty - Approved for use with the NV 2.0 (including NV 2.0 Add-On), Base 2.0 (including NV Base 2.0 Add-on) Sherpa 2.0, Transfer family, and the original NV 2” 2-bike only

Thule's Load Bars are a rock solid rack solution that come in 4 different widths to fit a huge range of vehicles.

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.